PDA

View Full Version : Error Code Bizhub C220 - Paper jammed at area 13 when poweed ON


Custom Search


AjitN
10-20-2013, 12:27 PM
While printing job was on, one sticker paper got jammed at fuser assy. Paper was removed by Customer bot machine still shows Paper jammed at area 13. Also bypass tray remains in lift position.
Action taken
checked all sensors and rollers for any paper/piece left.
Cleaned Fuser Assy.
Delete all pending Jobs.
Error reset through bootup utility counter mode.
Check paper jam counter which displayed 9901 code.
All data reset in service mode - system 1 option.
(No change in machine display)
9901 is controller stop due to unmatched paper size.
Any suggestions & thanks in advance

JustManuals
10-20-2013, 05:56 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

JR2ALTA
10-20-2013, 07:11 PM
Sounds pretty damn easy

Mr Spock
10-20-2013, 09:51 PM
there is a firmware update to fix false 9901 codes. However check tear machine apart as there is a label stuck some where .

Custom Search