View Full Version : BH920 DF-606 Latest Version
mrwho
02-05-2014, 05:58 PM
Good afternoon, folks.
Can someone please kindly tell me what's the latest version firmware for the 920's DF-606? I can't seem to find it on the KM's tech site (was it ever there?) and I've got a troubled DF that I could almost bet is firmware related.
Thanks!
mrwho
02-05-2014, 06:25 PM
Okay, you can ditch this one.
Problem: Paper would exit (1:1) or stop under the RADF on the reverse section (2:2) with the feeding motor rotating non-stop until you either opened the RADF door or lifted it up, proceeding next to give the corresponding jam code for that action (open door/lifting).
Cause: Failed skew sensor /Fr. After replacing it, problem is gone.
Anyway, I got v11 on the RADF, if someone could please confirm to me if it is the latest, I'd be very glad.
Cheers!
JustManuals
02-05-2014, 08:33 PM
Mr Who...........Didn't we go through this last week or so?
mrwho
02-06-2014, 12:22 AM
Yup, been there, done that. Finally found out what it was all about.
Best regards!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.