PDA

View Full Version : C-4101 Bizhub 950 Pro


Custom Search


solidzdawg
02-20-2014, 07:40 PM
950 Pro - 2million clicks.

4101 upon initialization, have replaced write assy, and dcps /2

Ordered PRCB and OACB, has anyone fought this error before? Much appreciated :)

-Z

JustManuals
02-20-2014, 07:52 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


http://www.justmanuals.com


Paul@justmanuals.com

blackcat4866
02-20-2014, 07:56 PM
Is the power clean? =^..^=

solidzdawg
02-20-2014, 11:57 PM
Power is clean--On a line conditioner also....

Any other ideas???

-Z

solidzdawg
02-25-2014, 12:13 AM
Update:

Parts tried:

New Write Assy (includes polygon motor drive board and polygon motor)

DCPS /1 , DCPS /2

PRCB

OACB

This machine still codes out upon initialization of Polygon motor speed changing... The polygon motor does not activate..


Any insight would be extremely helpful....

Synaux
02-25-2014, 12:45 AM
I don't have experience with this, but seems to me that you replaced the relevant parts.

My random thoughts:
Thoroughly examine your wiring for shorts, etc.
Check Polygon fan operation.
Maybe AC drive board.
Trouble reset & Firmware?

Custom Search