PDA

View Full Version : Miscellaneous Band


Custom Search


Dfriis
02-21-2014, 06:17 PM
Konica minolta c 6500 We are getting a darker band that is about 3/4 wide at the lead edge of the print 11x17 med/ heavy coverage simplex printed . After it runs 15 sheet or so id goes away. It isn't t the art work because if you rotate it is always on lead edge face down or face up. Any thoughts?

Mick01
02-23-2014, 11:33 PM
Hi, Try this solution below. Note, this minimises the issue, not removes it completely
Hope this helps.

SOLUTION: Adjust the DC separation setting:1. Set Dip-SW 1-0 to 1.2. Select Paper setting => Change => Process Adj. => Separation DC (Front) and (Back).3. Change the Separation DC settings from -20 to -30.4. Please check the dark band level.

Dfriis
02-24-2014, 01:40 PM
Hi, Try this solution below. Note, this minimises the issue, not removes it completely
Hope this helps.

SOLUTION: Adjust the DC separation setting:1. Set Dip-SW 1-0 to 1.2. Select Paper setting => Change => Process Adj. => Separation DC (Front) and (Back).3. Change the Separation DC settings from -20 to -30.
4. Please check the dark band level.


Yes that is what fixed it. Thank you. It really don't make sence because according to KM this is a humidity issue with heavy stock. It is drier the heck hear and this was on 100lb text. ???

No wonder I have no hair!!!

Mick01
02-24-2014, 10:13 PM
You are most welcome, happy to help.

Custom Search