PDA

View Full Version : C25 report scanning


Custom Search


BrunoIT
05-20-2014, 11:32 AM
Excuse for my english

Can i eliminate the printing of the transmission report in scans without removing the fax report on TX?

the customer is annoyed by the unnecessary paper consumption due to this report

emujo
05-20-2014, 01:46 PM
1st thing get a manual...soft switch 48 bit 7/6 if bit 7 is 1 and bit 6 is 0 report is generated on error, if bit 7 is 0 and bit 6 is 1, no report is generated. Emujo

SmellsHot
05-20-2014, 08:35 PM
1st thing get a manual...soft switch 48 bit 7/6 if bit 7 is 1 and bit 6 is 0 report is generated on error, if bit 7 is 0 and bit 6 is 1, no report is generated. Emujo

That's not very nice Emujo :)

I think he's asking for turning off the tx report for scanning, but not for faxing. I believe this dipswitch only toggles off both settings.
I have a few customers that always want a tx report for faxing, so unfortunately they get one when scanning .....clicks, clicks, clicks....

emujo
05-20-2014, 08:57 PM
Come on...I've been much worse than that...and he needs to get a manual...how many times do we have to research the answer for someone..no offense to the original poster...Emujo

Custom Search