PDA

View Full Version : reseting u4 error


Custom Search


351futura
05-17-2006, 06:11 PM
:woohoo: I have a friend in the family that has a xorox and I went over to check it out and the thing was in error u4 or u4f something to that and I replaced the thermofuse. A quick mod , but do not know how to reset fuser lock code after fuser shuts down. If someone has the walk through that would be great thanks.

raym
05-17-2006, 08:05 PM
what model of xerox? each one differs slightly.

ray

351futura
05-17-2006, 09:28 PM
I called and the models is a 5334, I have intrvia books, but there seems to be a step thats not in the book, I do thank you for this

Mr. Bill

raym
05-18-2006, 01:53 PM
hello mr. bill, try this. power on while holding \"0\" to get into diags. press \"routines\" tab on touchscreen. enter \"20\", \"print\", \"3\", \"print\", \"0\", \"print\". the display should show \"dn\" for done.

hth and good luck,
ray

Custom Search