View Full Version : Konica 7075 and IP601
imavietnamese
04-20-2008, 05:53 AM
hi friends. I'm a new member, now have few Konica 7075 and Di750 pinters and an IP601 and a Pi7500 print controlers . Can i plug one print controler with many printers.
help me!!! Urgen, please!!
Scott_Lewis
04-22-2008, 03:36 AM
hi friends. I'm a new member, now have few Konica 7075 and Di750 pinters and an IP601 and a Pi7500 print controlers . Can i plug one print controler with many printers.
help me!!! Urgen, please!!
One controller, one copier.
doma873
04-22-2008, 10:50 AM
Just a thought. What if you connect 2, 7075's as tandem and print from one controller. Been too long for me since i have setup this model, but it may work. Anyway its not really what you wanted i guess..
An old post but I have related question.
Is there any chance to set up a di750 and a 7075 in tandem mode with an IP601M controller?
Even if I already know that the machines need the exact same firmware and configuration ...
costel fasola
06-11-2010, 09:24 PM
no chance. is deferent
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.