PDA

View Full Version : CQ KM C6501 yellow faints as lower percentage


Custom Search


GeorgeK
11-13-2014, 08:07 PM
dear all,

In a Konica Minolta C6501 yellow print faints (top and bottom mostly) as lower percentage from 100% (page 1) to 50% (page 2) to 20% (page 3).

Corel or Adobe gives no change to result.

drum assy, dev. tank, developer mat., corona already replaced.
Transfer belt and tr. rolls also replaced.
Write unit cleaned (laser unit for most of us...)

Any ideas ?

Thanks in advance
George K.

PeterG
11-14-2014, 05:52 AM
It's the Y laser unit. There is an adjustment to compensate for it but I am sorry I just can't remember it.
Try contacting your tech support.
I will try to have a look next week.

RRodgers
11-14-2014, 06:26 AM
I think on the 6501 it's a user adjustment for under color balance. (it's been a while)

PeterG
11-17-2014, 01:51 AM
Found it. Uneven density adjustment.

Custom Search