Hansoon
12-18-2014, 04:20 PM
Customers charwoman had the habit to remove the power plug of the BH-C-253 for her vacuum cleaner. This resulted often in the machine only coming back to live again after several restarts. I warned them that this is not good at all. However, today it happened again and the machine was not any longer willing to accept that abuse and stalled. It fired up normal, sounded as even doing a calibration sequence, showing after the hourglass and Minolta logo a normal display with the usual soft buttons but was otherwise totally unresponsive. No soft nor hard buttons could be operated. The print button remained orange and it refused to accept any input and also calling up the web interface was not possible.
In a desperate attempt as a noob - lacking real experience with these series, I reseated the memory chips and also the hard drive. The following firing up of the machine resulted in again an unresponsive machine, now a dead display too and also both blue and orange indicator light steadily lighting up.
Any hints? Where to start please?
Hans
In a desperate attempt as a noob - lacking real experience with these series, I reseated the memory chips and also the hard drive. The following firing up of the machine resulted in again an unresponsive machine, now a dead display too and also both blue and orange indicator light steadily lighting up.
Any hints? Where to start please?
Hans