PDA

View Full Version : bizhub 600 jaming in duplex showing j1701


Custom Search


Naveed Shahid
02-22-2015, 08:55 PM
hello every one

bizhub 600 jaming in all trays once try to make duplex its showing j1701 if i try A4 r no jaming but A4 Always jaam if i try 3 copy its ok more then 3 put its jaming and showing j1701

regards

allan
02-22-2015, 11:16 PM
Did you remove the mylars from the duplex entrance. There is pinch rollers you can feel underneath the left side of the ADU remove the u channel and take of the mylars.

Sometimes the whole clear plastic tray needs to be removed disassembled and cleaned there is a black selector gate that also gets sticky or the spring pops of.

in your case i think its the mylars because SEF works.

Custom Search