PDA

View Full Version : C500 Fiery IC-405 / Fiery X3ETY software installation from usb flash drive


Custom Search


tack
03-03-2015, 05:38 PM
anybody know the procedure to reload the operating system on a FieryIC-405/Fiery X3ETY using a flash drive?

i have this Fiery showing FF and not recognized by the C500

i have the os discs so i burned a iso image to 8mb flash drive.

i inserted the flash drive

i tried rebooting the fiery with both dip switches in down postion and the fiery will boot and show 00 and then turn itself off.

i removed the usb and rebooted and the rip still hangs on FF.

i must be missing something in the procedure.

Thanks!


any ideas?

Custom Search