Originally Posted by
jermaine
Try this hope it works
Fuser life reset instructions
a. Press OK button, then GO button, next press UP (+) arrow button 4 timesNOTE: To enter the maintenance mode, you must press the GO button within 2 secondsafter pressing the OK button. Also, you need to press the Up arrow button within 2seconds after pressing the GO button.
b. Press Up (+) or Down (-) arrow keys until display shows “Maintenance 88”
c. Press OK button. “Reset-Fuser Unit” is displayed on the LCD
d. Press OK “Reset-Fuser Unit OK?” is displayed on the LCD
e. Press Ok to reset the fuser life.
f.Press Cancel button return to initial state of maintenance mode.
g. Press Up (+) or Down (-) arrow key until “Maintenance 99” is displayed.
Press OK to exitmaintenance mode.
Bookmarks