Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Jul 2014
    Location
    Texas, USA
    Posts
    2
    Rep Power
    0

    Requesting Brother MFC-L8900CDW toner reset instructions

    Brother MFC-L8900CDW has four toners in the TN-430 series (TN-436 is the high capacity toner, listing to help searchers). The toners do not have a reset gear.

    I refilled the toners, but the machine still shows toner low. How do I notify the machine the toner has been replaced?


  2. #2
    Senior Tech 250+ Posts
    Requesting Brother MFC-L8900CDW toner reset instructions


    Join Date
    Jun 2013
    Location
    WI
    Posts
    289
    Rep Power
    15

    Re: Requesting Brother MFC-L8900CDW toner reset instructions

    If not mistaken, those toners are chipped, you might want to order the chips for those thru e-bay. There is a procedure on YouTube on how to make them run a little longer after they run their course.


  3. #3
    Service Manager 2,500+ Posts
    Requesting Brother MFC-L8900CDW toner reset instructions

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    2,851
    Rep Power
    44

    Re: Requesting Brother MFC-L8900CDW toner reset instructions

    Quote Originally Posted by ndemarco View Post
    Brother MFC-L8900CDW has four toners in the TN-430 series (TN-436 is the high capacity toner, listing to help searchers). The toners do not have a reset gear.

    I refilled the toners, but the machine still shows toner low. How do I notify the machine the toner has been replaced?
    i emailed you the manuals ... did you get them?


  4. #4
    Junior Member
    Join Date
    Jul 2014
    Location
    Texas, USA
    Posts
    2
    Rep Power
    0

    Unhappy Re: Requesting Brother MFC-L8900CDW toner reset instructions

    Quote Originally Posted by Phil B. View Post
    i emailed you the manuals ... did you get them?
    Thanks, but negative. I just checked gmail's spam and trash, too using in:anywhere after:2018/1/11 before:2018/1/14


  5. #5
    Junior Member
    Join Date
    Jan 2018
    Location
    Frisco,TX
    Posts
    1
    Rep Power
    0

    Re: Requesting Brother MFC-L8900CDW toner reset instructions

    Quote Originally Posted by ndemarco View Post
    Brother MFC-L8900CDW has four toners in the TN-430 series (TN-436 is the high capacity toner, listing to help searchers). The toners do not have a reset gear.

    I refilled the toners, but the machine still shows toner low. How do I notify the machine the toner has been replaced?
    Did you ever get an answer to this? I'm usually very good at finding the (hidden) menu options to do this. The starter cartridges have no reset gear. When you buy new cartridges, they have the reset gears. However aaatoner usually has reset gears for all Brother cartridges, but don't have them for this one yet.


  6. #6
    Junior Member
    Join Date
    Apr 2014
    Posts
    3
    Rep Power
    0

    Re: Requesting Brother MFC-L8900CDW toner reset instructions

    You will need a Phillips Head Screwdriver.1) Remove the Toner Cartridge2) Loosen the Phillips Head screw near the black gear 3 revolutions.3) Loosen the other two screws 1 revolution.Do not loosen them all the way, the gears are spring loaded and will fly across the room.4) Pull the plastic cover away from the cartridge, and press the Black plastic gear with your screwdriver. The gear will click and spring back into place5) Tighten the screws and reinstall the cartridge in the printerallow the printer to re-calibrate. You now have a "FULL" toner cartridge.


  7. #7
    Service Manager 2,500+ Posts
    Requesting Brother MFC-L8900CDW toner reset instructions

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    2,851
    Rep Power
    44

    Re: Requesting Brother MFC-L8900CDW toner reset instructions

    Quote Originally Posted by tech28 View Post
    If not mistaken, those toners are chipped, you might want to order the chips for those thru e-bay. There is a procedure on YouTube on how to make them run a little longer after they run their course.
    wrong.. look in service manual.. dev reset


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here