good day guys. after i replace the main board of this printer the "maintenance" word appear on lcd and blinking backlight. im not trained tech on this brand pleased any one can help me on this thanks in advance.
good day guys. after i replace the main board of this printer the "maintenance" word appear on lcd and blinking backlight. im not trained tech on this brand pleased any one can help me on this thanks in advance.
there is no glory without sacrifice
Needs the raw firmware file loaded. That can be obtained from an Authorised Brother Dealer along with the utility to load it.
thanks you elmtech i already figure out the problem. just set the country code under maintenance 74 and i solves the problem.thanks you so much for your response.
there is no glory without sacrifice
Bookmarks