Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    MFC 8910 Runs 1 page ok, run three pages and it jams.

    Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    1,089
    Rep Power
    44

    MFC 8910 Runs 1 page ok, run three pages and it jams.

    I'm not real familiar with the brothers products but I do see my customers with them. And that is why I have
    this one in the shop. It's from a good customer.
    Like I said run 3 pages and it jams. Not crunching the paper, just stopping. I am going to spend some quality
    time with this little guy tonight.
    Any suggestions on what I should be looking for? I'm thinking a clutch or oneway bearing. May be a sticky
    sensor flag or solenoid?

    Thanks

    DR

  2. #2
    Service Manager 10,000+ Posts
    MFC 8910 Runs 1 page ok, run three pages and it jams.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: MFC 8910 Runs 1 page ok, run three pages and it jams.

    Quote Originally Posted by Desert Rat View Post
    I'm not real familiar with the brothers products but I do see my customers with them. And that is why I have
    this one in the shop. It's from a good customer.
    Like I said run 3 pages and it jams. Not crunching the paper, just stopping. I am going to spend some quality
    time with this little guy tonight.
    Any suggestions on what I should be looking for? I'm thinking a clutch or oneway bearing. May be a sticky
    sensor flag or solenoid?
    Thanks DR
    ok WHERE is it jamming ?

    jam code?

    run a user settings report and tell me the life on the items. it could be the PFKIT1 is needing replaced.

  3. #3
    Trusted Tech 50+ Posts masterchill's Avatar
    Join Date
    Jul 2005
    Location
    UD,PA
    Posts
    95
    Rep Power
    40

    Re: MFC 8910 Runs 1 page ok, run three pages and it jams.

    Could be bad fuser. The fuser film will slip and cause a jam. Also the exit switch can hang up that is by the fuser.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Apr 2014
    Location
    Los Angeles
    Posts
    517
    Rep Power
    30

    Re: MFC 8910 Runs 1 page ok, run three pages and it jams.

    sounds like a sticking paper feed roller solenoid foam. try removing the side cover and watch it run for a while. a slipping film is usually indicated by a blurry or fuzzy look to the print.

    if its the foam, just scape it off completely and clean both sides.
    good luck.

  5. #5
    Service Manager 1,000+ Posts
    MFC 8910 Runs 1 page ok, run three pages and it jams.

    Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    1,089
    Rep Power
    44

    Re: MFC 8910 Runs 1 page ok, run three pages and it jams.

    Thank you all for your replies. I will be getting into this machine tonight or tomorrow.
    I will post the info requested. And yes pulling the covers off and watching it run will
    be the next step. I have seen those foam pads cause problem on other machines as well.

    Thanks for the advice

    DR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here