Just wondering if you had any thoughts on the aforementioned guide? Is there another series of this machine that might be similar to this who's parts manual might show that piece? Curiosity only really. The customer said for the most part it runs fine without it so long as they don't duplex then it tends to jam.
Thanks for all the help
Chris
TJL Copy
No worries. It's just more for curiosity now than anything else. I did misspeak with the picture numbers. #7 is the plate in front of #8 but it shows 2 screws securing it. Which is what I was trying to say, but it's Friday and my attention level to detail was low. haha
Appreciate the effort anyhow
Chris
TJL Copy
These rollers are parts of Fuser unit unfortunately. They will come separated like in picture when new Fuser is purchased.
Don't think only rolers with that little plastic guide can be purchased separate.
Fuser.jpg
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Well, my bad. Interestingly they seems to omited this Back flapper holder. Only found shadow of it in MFC-L8900CDW/L9570CDW parts list.
Нevertheless, NО part number.
Flapper.jpg
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks