Thanks:
0
Likes:
0
Dislikes:
0
-
Brother HL-5150D drum unit "salvaging"
After changing the drum and resetting the drum counter, the printer output was "spotty" (because of the fusing unit as I learned later). I tried another new drum (a Brother unit rebuilt by Xerox) and inadvertently reset again the drum counter. As far as I know, this process blows a fuse inside the drum.
Is there a way to salvage the second, practically brand new drum unit when the present drum will "wear out"?
-
You can use the other drum unit without a problem. Just go through the same reset process when installing the replacement drum unit. The machine reset a internal counter in the machine itself.
-
Thank you Techtime, I'm looking forward using your hint in due time.
-
Re: Brother HL-5150D drum unit "salvaging"
Maybe the problem is the drivers, so you can reinstall the drivers for this software, and you can get it from here: Brother HL-5150D Printer Drivers Download.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks