Thanks:
0
Likes:
0
Dislikes:
0
-
Dr-400 problem with hl-1440
hello all
i am having some trouble with an hl1440 the drum is not getting cleaned off so i am getting smears on the prints. If you take the drum out and look at it you can see toner residue on it. I have replace the drum and toner cart. The fuser rollers look fine as well. Anyone have any ideas? I will attach a sample of my prints.
DOC..pdf
-
Technician
- Rep Power
- 31
I'm sure it's either the drum or the toner. Most likely the drum. Try OEM supplies if you haven't already. Printing partial sheets of self-adhesive labels will cause toner to stick to the adhesive residue that will build up on the drum surface. GOOD LUCK...Jerry
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: Dr-400 problem with hl-1440
Replacing toner or drum with a generic sometimes cause this issue.
Try to replace it with OEM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks