Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Field Supervisor 500+ Posts
    BROTHER MFC9440/Error 32


    Join Date
    Mar 2007
    Location
    Brooklyn
    Posts
    531
    Rep Power
    29

    BROTHER MFC9440/Error 32

    HI,
    Customer called up with code 32 on machine.Is there supposed to be subcode,and is there a reset procedure for error codes. Also if you could tell me what it refers to I t would be helpful,In meantime Ill try to find out as I thought I had manual somewhere.
    Thanks Andy


  2. #2
    Service Manager 10,000+ Posts
    BROTHER MFC9440/Error 32

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,015
    Rep Power
    142
    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
    Just Manuals | The Internet's largest selection of manuals | Instant Downloads


    Paul@justmanuals.com



  3. #3
    Hair Straightener Tech 500+ Posts rsyarcia's Avatar
    Join Date
    Feb 2008
    Location
    Nueva Vizcaya
    Posts
    707
    Rep Power
    34
    density sensor shutter performance malfunction

    Nobody is perfect..

  4. #4
    Field Supervisor 500+ Posts
    BROTHER MFC9440/Error 32


    Join Date
    Mar 2007
    Location
    Brooklyn
    Posts
    531
    Rep Power
    29
    HI,
    Thank you for helping identify problem.Have you come across this problem before?Does sensor need to be replaced or can it be cleaned or adjusted?
    Thanks Andy


  5. #5
    Service Manager 1,000+ Posts
    BROTHER MFC9440/Error 32

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo East
    Posts
    1,245
    Rep Power
    37

  6. #6
    Master Of The Obvious 10,000+ Posts
    BROTHER MFC9440/Error 32

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,384
    Rep Power
    268

    Re: BROTHER MFC9440/Error 32

    Special thanks to bojans for having just what I needed.

    I took the call this afternoon, and just out of curiosity flipped open the folder Brother > Bulletins ... and what do you know? I have a PDF document named "Print Unable 32".

    I can be fairly sure that I have never seen this problem before ... regardless, it points me right to the reflective sensor pointing at the transfer belt. I couldn't actually see the sensor until I vacuumed off a pile of yellow toner from it.

    All I can think of is that this bulletin looked interesting, and that I'd stowed it away for just such a situation. Thanks again. =^..^=

    Last edited by blackcat4866; 07-24-2013 at 12:32 AM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  7. #7
    Service Manager 1,000+ Posts
    BROTHER MFC9440/Error 32

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo East
    Posts
    1,245
    Rep Power
    37

    Re: BROTHER MFC9440/Error 32

    You're welcome


  8. #8
    Senior Tech 100+ Posts Jeff M.'s Avatar
    Join Date
    Dec 2010
    Location
    New Bedford, MA
    Posts
    119
    Rep Power
    17

    Re: BROTHER MFC9440/Error 32

    Hi all.

    I got a call on this problem today. Funny thing is, it will print an internal print (user setting list, etc) no problem, but when you copy or print, it gives the 32 error. So that would eliminate the dirty sensor, wouldn't it? Scanner is moving, just won't start the printing process when copying or printing.

    Any other ideas would be appreciated.
    Thanks.... Jeff M.


  9. #9
    Service Manager 2,500+ Posts
    BROTHER MFC9440/Error 32

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    2,697
    Rep Power
    41

    Re: BROTHER MFC9440/Error 32

    Quote Originally Posted by Jeff M. View Post
    Hi all.
    Any other ideas would be appreciated.
    Thanks.... Jeff M.
    this thread has been DEAD for YEARS ( at least 4 )

    try starting a new thread of your own.


  10. #10
    Senior Tech 100+ Posts Jeff M.'s Avatar
    Join Date
    Dec 2010
    Location
    New Bedford, MA
    Posts
    119
    Rep Power
    17

    Re: BROTHER MFC9440/Error 32

    I'll do that.
    Thanks.
    Jeff M.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here