try this. power off and open front cover. press and hold "go" while powering on. once the three led's are lit, release "go" button. now press "go" two times. led's should light solid. once lit solid, press "go" five more times. close cover and toner end should be reset.
Got pic of gear and I will look for that, but this happened by just pushing GO button?
I'll check it. Thanks
Something else I noticed, when power is turned on unit doesn't turn on, just the fan.
Usually, the unit runs for a few seconds and then shuts down. Is there a fuse on the heater unit? Tried Raym reset, but after holding GO and powering on all lights come on, release GO lights go out, hit GO twice nothing is lit except the Ready lite.