Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 28
HL-5450DN jams at fuser
Hi. Have an HL-5450DN, customer recently replaced drum. Worked for 2 days, then started jamming at fuser. Paper will come up to fuser, then stops, reverses itself for a second (makes a grinding noise and shudders the whole machine) then stops. Fuser seems fine, turns and exit sensor is working. OEM drum, warming up runs fine, no noises. Any hints? Thanks.. Jeff M.
-
Technician
- Rep Power
- 22
Re: HL-5450DN jams at fuser
Hey there,
got the same mistake today....
I went to a customer, Printer has worked fine ( prints were only dirty)
So i changed drum and toner.
After a few hours the Printer started jamming behind fusing section. Sensors are all okay.
Dose someone have solution?
Greetz
Scotty
-
Technician
- Rep Power
- 22
Re: HL-5450DN jams at fuser
Paperjam went away by themselve. Dont know why but Printer works
-
Re: HL-5450DN jams at fuser
Hey,
Replace fuser - problems solved (common problem)
Greetz
-
Technician
- Rep Power
- 22
Re: HL-5450DN jams at fuser
Sensor in the fuser unit is working fine. Also the printer works fine now, had no call since April.
greetz
-
Junior Member
- Rep Power
- 0
Re: HL-5450DN jams at fuser
Today solved a HL-5450DN that had the same problem.
The fuser was very hard to rotate. The pressure roller couldn't put in motion the fuser film. After putting a few drops of ricoh fuser oil under the fixing film and reassembling the fuser unit, it started working fine.
I'll let you know if it will stop working.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks