I have replaced belt sensor, density sensor, transfer H.V.P.S., waste box,transfer belt and still get error. Any ideas?
I have replaced belt sensor, density sensor, transfer H.V.P.S., waste box,transfer belt and still get error. Any ideas?
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
I have tried replacing the drive train per brother tech support, this did not fix either.
problem resolved, it proved to be the belt release solonoid
You all are awesome for posting this! I wanted to add what helped me get this done. Sorry for dumbing it down (I'm not a printer tech). Little white piece was sticking to foam (sticky surface) when spring compressed, so I put a tiny piece of clear tape over this sticky foam. I also stretched the spring a bit to help it return. Thank you again, and I hope this helps someone else like me. Also, I found another description of how to get to this part (Google MFC-9400CN Print Unable 2A FIX).
Yeah all the foam pieces on the solenoids for this machine are going bad now. Seeing a lot of these calls. Pretty easy fix considering there's no metal involved... you can get away with just peeling off the foam and that's it.
Thanks for have info also very much.quite helpful.I really appreciate it.have a nice weekend, Jim
Bookmarks