Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 0
mfc9440
hello
I have a brother mfc9440 from " Unable to print error 32 " ... what about?
-
Re: mfc9440
Color adjustment shutter failure
1 Density sensor shutter catching on some position
Correct catching of the density sensor shutter.
2 Density sensor holder ASSY
assembling failure
Reassemble the density sensor holder ASSY
correctly
I think the sensity sensor checks the transfer belt and is kind of located below it/near fuser.
-
Junior Member
- Rep Power
- 0
Re: mfc9440
Most likely problem is the density sensor. located under waste toner in the very back of the inside cavity. The sensor has a shutter over it when the waste toner box is removed. If after cleaning this sensor window does not fix, replace the transfer power supply. The sensor is included on this part.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: mfc9440
thanks
I solved it ... I clean the density sensor under the waste toner
thanks
hello
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks