Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 35
Brother MFC 9970 cdw op panel
Hi all its been a while. I'm sure this is probably an easy one but I can't seem to figure it out, please help.
I can not figure out how to remove the control panel on this machine, it looks like I need to remove the scanner but it looks like there are screws under the control panel that need to be removed first.
Please what am I missing?
I need to remove it for a code of CE, I found out that is for the control panel.
Thank you
Cameron
-
Junior Member
- Rep Power
- 0
Re: Brother MFC 9970 cdw op panel
The actual surface of the panel removes by unhooking. Then there are 4 screws underneath. The bottom edge of the lower part of the panel is hooked. Once it is unhooked it can be lifted away and the harness unplugged.
-
Senior Tech
100+ Posts
- Rep Power
- 35
Re: Brother MFC 9970 cdw op panel
Thank you, I will try that.
Cameron
-
Junior Member
- Rep Power
- 0
Re: Brother MFC 9970 cdw op panel
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks