Hello
I have jam 0107 almost each sheet .I replaced entire DUPLEXING ASSEMBLY,FIXING ASSEMBLY,MULTI FEED ASSEMBLY,TRANSFER BELT ASSEMBLY, but still jaming.What have I missed.
Any help will be welcome.
20150610_173609 jam 0107.jpg
Thanks
Hello
I have jam 0107 almost each sheet .I replaced entire DUPLEXING ASSEMBLY,FIXING ASSEMBLY,MULTI FEED ASSEMBLY,TRANSFER BELT ASSEMBLY, but still jaming.What have I missed.
Any help will be welcome.
20150610_173609 jam 0107.jpg
Thanks
************
Make sure the internal delivery rubber rollers are not mush
Check the Fixing motor connector_?
If paper is arching over that sensor on fuser guide plate , u have an issue that will stop rollers from turning.
Check / fix motor connection and /or motor.
Also make sure the front door on fix unit is closing properly.
Engage gear could be issue.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
When the machine attempts to make a printout, the malf
unction of the fixing drive motor occurring after the
initial rotation prevents the fixing roller from rotating, and the paper delivery stops before the fixing roller,
leading to JAM (0107
<Factory Measure>
We will modify points where the adhesive is applied to lock the screws supporting the fixing drive motor, so as
to prevent it from staining the motor damper
Capture.jpg
Service Work:
When the above symptom occurs, use
[BEFORE CORRECTION: the clock driver]
[AFTER CORRECTION: the Precision Screwdriver]
to remove the adhesive staining the motor damper.
Capture.jpg
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Wait today I will try.Thank you for caring.
Jam is resolved.
Zoraldinho is the man ,you get a beer.Thanks also Teckat.
No problem.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks