Thanks:
0
Dislikes:
0
-
Re: ir5065 cannot detect the reader/scanner unit
do you have power to the reader?
-
Re: ir5065 cannot detect the reader/scanner unit
Is J301 on the Interface PCB in the Reader unit receiving 13 and 24 volts DC from the Accessory Power Supply.
_??
Check the Memory PCB in the Reader unit and the pair of flat ribbon cables that run from the Reader Controller PCB to the Interface PCB and the Memory PCB.
The part number for ordering and replacing the Memory PCB in the Reader unit is FM3-4436-000.
The part number for ordering and replacing the pair of Flat Ribbon cables that plug into J202 and J203 on the Reader Controller PCB is FL2-5812-000.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Likes: 
Reply With Quote
Bookmarks