Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    Service Manager 10,000+ Posts
    IPF8300 print head question

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,785
    Rep Power
    226

    Re: IPF8300 print head question

    good luck

    active link


    imagePROGRAF_Major_Component_ID_and_Replacement video


    Dropbox - imagePROGRAF_Major_Component_ID_and_Replacement.ex e

    Download and unzip the above file. Then click the RUN.html file to launch the video.

    Scrool to page 3> select Menu>Under Major Componet Replacement > select ipf8000 series> select Carriage Unit /Print Head removal> will show removal procedure.
    Don't use Firefox to open/run .html --use IE
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  2. #22
    Field Supervisor 500+ Posts
    IPF8300 print head question

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    673
    Rep Power
    18

    Re: IPF8300 print head question

    If your iPF starts going through print heads faster than what's considered usual (around 2 years +/-), you should probably replace the purge unit caps...or the purge unit itself.

    Don't have my Prograf manuals handy, but I do know there's a part number for just the caps for the print heads. The purge unit itself is QM3-7018-030.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here