Likes:
0
Dislikes:
0
-
-
Re: IPF8300 print head question
If your iPF starts going through print heads faster than what's considered usual (around 2 years +/-), you should probably replace the purge unit caps...or the purge unit itself.
Don't have my Prograf manuals handy, but I do know there's a part number for just the caps for the print heads. The purge unit itself is QM3-7018-030.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks