Ir adv 6255 (not waking up from sleep mode)

[gksapple]

HI
IR ADV 6255
MACHINE IS NOT WAKING UP FROM SLEEP MODE ,every time when its goes to sleep we have switch off and switch on to use machine

*updated the firmware to latest MN con 18.02 but no use still in the same condition
looking for some suggestion

[mramlawi]

hi change the Main Control Board and it will works .since a week happened same problem with me i debut in the power supply first then i realized its the Main Board i changed it and it works normally

[teckat]

HI
IR ADV 6255
MACHINE IS NOT WAKING UP FROM SLEEP MODE ,every time when its goes to sleep we have switch off and switch on to use machine

*updated the firmware to latest MN con 18.02 but no use still in the same condition
looking for some suggestion

-------------------

Try & remove/clean/ re-seat RAM Dimms on MN-CON1
or
Replacement of Right Support 24V Supply==FC9-5007-000
#32 in pic

[mramlawi]

the weird thing that the machine is brand new and it just work 13000 copies and i changed the main conrtol and it works must be some updates to this or dont know the reason if any one know i will be thankful

[teckat]

the weird thing that the machine is brand new and it just work 13000 copies and i changed the main conrtol and it works must be some updates to this or dont know the reason if any one know i will be thankful

NOTE:

You may just have some poor connections into that board/
did / are you able test removed board on another printer to create the issue

[mramlawi]

NOTE:

You may just have some poor connections into that board/
did / are you able test removed board on another printer to create the issue

Yes i tried the part on another machine and it works then after a few hrs made same problem really weird its a brand new machine must be some bulltin for this issue

[teckat]

Yes i tried the part on another machine and it works then after a few hrs made same problem really weird its a brand new machine must be some bulltin for this issue

👀
Only thing posted for symptoms is Right Support 24V Supply replacement.

[gksapple]

hi change the Main Control Board and it will works .since a week happened same problem with me i debut in the power supply first then i realized its the Main Board i changed it and it works normally

HI
IS THAT MCB 1?

[gksapple]

Replaced the full power supply(swapped from another working machine)but still not resolved

-------------------

try & remove/clean/ re-seat ram dimms on mn-con1
or
replacement of right support 24v supply==fc9-5007-000
#32 in pic

[teckat]

Replaced the full power supply(swapped from another working machine)but still not resolved

====================================
Try inspection and re-seating all components on the controller


if applies

turn "off" the option "Reject SNMP Packets While in Sleep Mode
Settings Registration > Network > SNMP Settings > Reject SNMP Packets While in Sleep Mode. [ on / off ]



set "Sleep Mode Energy Use" to "low"

Did you Set a Time for the Device to Automatically Exit Sleep Mode