Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Canon ir4580 yellow color not appearing complete

    Hi to all im facing a weird problem in this machine suddenly the (y) appear half on the picture,i changed transfer belt,drum,laser,also i made a clear dc,maincont,chaning high voltage and nothing change can any one help me ,now im debut in main contral Pcb and power supply.
    Attached Images Attached Images
    Distinguished road makes you jewel in rough

  2. #2
    Service Manager 10,000+ Posts
    Canon ir4580 yellow color not appearing complete

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon ir4580 yellow color not appearing complete

    Quote Originally Posted by mramlawi View Post
    Hi to all im facing a weird problem in this machine suddenly the (y) appear half on the picture,i changed transfer belt,drum,laser,also i made a clear dc,maincont,chaning high voltage and nothing change can any one help me ,now im debut in main contral Pcb and power supply.


    easy fix
    remove ITB
    remove ITB Sheet
    take a look at the YELLOW PRIMARY TRANSFER ROLLER POSITION
    i bet it is not locked down on one side
    check those black catches & springs that end shaft sits into( missing>/cracked or other
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: Canon ir4580 yellow color not appearing complete

    Thank you ,but i already changed the itb belt with a used one
    Distinguished road makes you jewel in rough

  4. #4
    Service Manager 5,000+ Posts
    Canon ir4580 yellow color not appearing complete

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,528
    Rep Power
    182

    Re: Canon ir4580 yellow color not appearing complete

    Did you just replace the belt or the complete ITB ASS'Y?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #5
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: Canon ir4580 yellow color not appearing complete

    Quote Originally Posted by copier tech View Post
    Did you just replace the belt or the complete ITB ASS'Y?

    Yes i meant i replaced all the itb belt assembley with other one and same problem
    Distinguished road makes you jewel in rough

  6. #6
    Service Manager 10,000+ Posts
    Canon ir4580 yellow color not appearing complete

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon ir4580 yellow color not appearing complete

    Yellow is washed out on the operator's side of the machine.


    Yellow is washed out on the operator's side of the machine and is normal on the rear side.
    All other colors print fine.
    After stopping a PG5 test print in yellow at 255 on the ITB, it was apparent that the operators side was washed out on the ITB before secondary transfer.
    Next, the YellowPG5 test print at 255 was stopped on the drum.
    The drum was coated evenly with Yellow Toner. After inspecting the ITB Unit, it was discovered that the front side was not lifting correctly.

    ~~~~~~~~~~~~~~~~~~~
    In this case, replacing the ITB Arm Pressure, Front (FB6-2961-000) and Lever Lock (FB6-2965-000) resolved the issue.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Service Manager 10,000+ Posts
    Canon ir4580 yellow color not appearing complete

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon ir4580 yellow color not appearing complete

    Yellow -> Missing on Either Side of the Copy


    Yellow missing on either side of the image in the sub scan direction on all copy jobs, print jobs, and test prints.
    PG5 yellow mono and PG10 also showed the same symptom with the yellow missing.


    Checked the cams for correct operation by using the lock handle in the front of the machine.
    Stopped the copy mid stream to determine if there is any yellow toner on the ITB or on the Drum Surface,

    The yellow toner was absent from one side of the ITB but present on the drum then looked at the locking cams for the ITB on the frame of the copier.

    Confirmed the springs inside the cam assembly did not come out of position.
    In this case, found that the e-clip that locks the cam in place came off.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: Canon ir4580 yellow color not appearing complete

    Quote Originally Posted by teckat View Post
    Yellow -> Missing on Either Side of the Copy


    Yellow missing on either side of the image in the sub scan direction on all copy jobs, print jobs, and test prints.
    PG5 yellow mono and PG10 also showed the same symptom with the yellow missing.


    Checked the cams for correct operation by using the lock handle in the front of the machine.
    Stopped the copy mid stream to determine if there is any yellow toner on the ITB or on the Drum Surface,

    The yellow toner was absent from one side of the ITB but present on the drum then looked at the locking cams for the ITB on the frame of the copier.

    Confirmed the springs inside the cam assembly did not come out of position.
    In this case, found that the e-clip that locks the cam in place came off.







    Mission accomplish teckat i dont know what to tell you I Love you man i changed the part you wrote and the problem ia solved. Lovee uuu
    Distinguished road makes you jewel in rough

  9. #9
    Service Manager 10,000+ Posts
    Canon ir4580 yellow color not appearing complete

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon ir4580 yellow color not appearing complete

    Quote Originally Posted by mramlawi View Post
    Mission accomplish teckat i dont know what to tell you I Love you man i changed the part you wrote and the problem ia solved. Lovee uuu
    Thumbs up.jpgwelcome
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Service Manager 5,000+ Posts
    Canon ir4580 yellow color not appearing complete

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,528
    Rep Power
    182

    Re: Canon ir4580 yellow color not appearing complete

    Are we going to have our first Copy Tech wedding!!???
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here