Duplex jam from Side deck on CLC5151

[rayjeek]

Paper jams intermittently in duplex from paper side deck Y1 with 010C jam code. 2 sheets of paper will be at vertical path section, 1 sheet stuck in fuser, 1 in duplex section. Would appreciate any help as the previous post on this same sympton did not reveal any resolution. Thanks.

[teckat]

Paper jams intermittently in duplex from paper side deck Y1 with 010C jam code. 2 sheets of paper will be at vertical path section, 1 sheet stuck in fuser, 1 in duplex section. Would appreciate any help as the previous post on this same sympton did not reveal any resolution. Thanks.

not too many things to look at for a Delay out of Deck

Deck Pick Up Roller Releasing Solenoid SL1 =adjust

Deck>Paper Sensor Lever - movement

[rayjeek]

Thanks will have a look at this solenoid adjustment which I read from somewhere else too..

[teckat]

Thanks will have a look at this solenoid adjustment which I read from somewhere else too..

I also remember having issues with the lifter cables/
bringing plate off kilter to lift paper up to level sensor



Position of the Deck Pickup Roller
Releasing Solenoid (SL1)
Before removing the deck pickup roller releasing solenoid [1] from the support plate, take mental note
of the position of the 2 fixing screws [2] with reference to the index on the support plate. Or, mark the position of the solenoid on the support with a
scribe.
When mounting the solenoid on its own, secure it in place to its initial position.

plate.jpg

[rayjeek]

Problem resolved by replacing the side deck pickup assy as adjusting the Deck Pick Up Roller Releasing Solenoid SL1 didn't get rid of the issue.

Many thanks to TECKAT

[teckat]

Problem resolved by replacing the side deck pickup assy as adjusting the Deck Pick Up Roller Releasing Solenoid SL1 didn't get rid of the issue.

Many thanks to TECKAT

Good move 🍺

Did I mention "I hate that deck" 😱