Ir 3570 jamming before fuser

**danko72** · 09-03-2015

Hello I have jam before paper enter to fixing assembly, I've just replaced the complete fixing assembly.

Thanks a lot for any help.20150903_072349[1].jpg

**Canuck** · 09-03-2015

Worn pre-reg sensor actuator probably

**danko72** · 09-03-2015

Originally Posted by Canuck

Worn pre-reg sensor actuator probably

Could you tell me what I have to do in order to fix it?
Thanks very much

**zoraldinho** · 09-03-2015

Replace drum with OEM or try this to isolate issue.

**hidius** · 09-04-2015

does it jam on all the trays ?

**danko72** · 09-04-2015

Originally Posted by hidius

does it jam on all the trays ?

Yes, on all paper trays before enter to the fuser

**dan7777** · 09-04-2015

Originally Posted by danko72

Yes, on all paper trays before enter to the fuser

Might help to have the jam code. Wish I had a dollar for every jam call I went on with this series, does not feed paper well at all! Try and turn loop up from 63 to 80. There is a lower right door modification and the transport rollers should be grey not black.

**ernesto** · 09-05-2015

What is the jam code?

**danko72** · 09-05-2015

Originally Posted by dan7777

Might help to have the jam code. Wish I had a dollar for every jam call I went on with this series, does not feed paper well at all! Try and turn loop up from 63 to 80. There is a lower right door modification and the transport rollers should be grey not black.

Jam Code 0107.
Thanks