Canon ImageRunner Advance 4051 scan

[Thom]

I have a Canon IRA 4051machine that needs the small ADF glass. I only have one of these machines and it keeps getting a "clean the feeder(?)" error for the customer. I haven't seen the error, but the glass is pretty worn thru the scan area, so thought it needs replaced. Does anyone have the part number for it and the mylar guides (if they are separate)? Or, any other ideas? Thanks in advance!


Thom

[teckat]

I have a Canon IRA 4051machine that needs the small ADF glass. I only have one of these machines and it keeps getting a "clean the feeder(?)" error for the customer. I haven't seen the error, but the glass is pretty worn thru the scan area, so thought it needs replaced. Does anyone have the part number for it and the mylar guides (if they are separate)? Or, any other ideas? Thanks in advance!


Thom

Feed guide (dust collection tape) ?
FL3-2860-000
-Peel off the release paper of the new feed guide.
-Attach the new feed guide.
NOTE:
When replacing the consumable parts, be sure to clear the parts counter.
(Lv1.COPIER > COUNTER > DRBL-2 > LNT-TAPE1 )

or Stream Reading Glass in (reader unit) ?
FL3-3206-000/ GLASS, READER

[dan7777]

I have a Canon IRA 4051machine that needs the small ADF glass. I only have one of these machines and it keeps getting a "clean the feeder(?)" error for the customer. I haven't seen the error, but the glass is pretty worn thru the scan area, so thought it needs replaced. Does anyone have the part number for it and the mylar guides (if they are separate)? Or, any other ideas? Thanks in advance!


Thom

FL3-3206-000 Reader glass

For sensivity level I think it is copier>option>img-rdr>DFDST1 and L2. Turn to minimum 125. I like to turn mine to 80. Teach customer how to clean scan glass. You can turn it off in regular settings mode. Does not need glass until it causes lines but good idea to replace if you think it is causeing line. It has never worked well and we turn ours down on setup.