IR 3200 Image Quality Problem

[Codex]

Hello

I have a Problem with a Canon IR 3200,if i make a normal copy or a Print the copy/print is ok, but if i make a copy/print of a document with big letters or a Photo in it the quality is not so good, the letters are light /blured inside and not really black, but a kind of grey.
I tried to change the Drum Unit and the Development Unit and also the Transfer Unit but the result is the same........

Thank you

[kwazimoto]

the drum unit and the dv unit are the one and the same... if printing is ok then the problem sounds like it is to do with the scanner ..because you prints are k.. have you did a auto gridation... to see if that changes anything... also is it just black that is bad or all colors????

[Codex]

Hello

I tried to change the Drum UNit, but with no result.....It's a B/W Printer, it's not an IRC but only IR....the problem is only on Black.I also changed the Toner supply unit....but same problem

[peterepeat]

The Canon IR3200 is a color machine. Is it an IR3300 maybe?

[yourownfree]

sounds like peterrepeat might be right, not a color machine. Sounds like somebody tried to save money and not put the right toner in the machine.

[_SuabE_]

How many copies the machine does now? Did you ever clean the laser unit?

[Codex]

Hello


The Toner are new, and i cleaned the LAser Unit last week, but the maschine have still the same problem.


Thank you all for your Help

[toddbac]

Stop the image under the drum and see if the image is good there. It should be good there because I believe that the problem lies in the fuser unit. Change the fuser film.

Todd

[Codex]

Hello

The fusing unit is new..........

[bicool]

Try to increase and reduce darkness from the first screen to see any change, if no, go to ADJUST in service mode and check the value for DENS....