Canon ir2530 duplex jaming

[gksapple]

THANK U NOW ITS WOKING FINE (SPRING POSITION IS ADJUSTED )


[QUOTE=teckat;543527]==============================



0109 =delay jam =no. 2 delivery sensor s42

have u checked the sensor

try to Remove and re-install the Second Paper Delivery Assembly.

==========================================
0109 Jam, Only When Duplexingwhen 0109 jam occurs only when making duplex prints, check the spring for the Second Delivery Flapper.
The spring may be out of place; preventing the flapper from returning back properly.

See the image below for the correct positioning of the spring.
[/QUOT

[teckat]

[QUOTE=gksapple;544629]THANK U NOW ITS WOKING FINE (SPRING POSITION IS ADJUSTED )

==============================



0109 =delay jam =no. 2 delivery sensor s42

have u checked the sensor

try to Remove and re-install the Second Paper Delivery Assembly.

==========================================
0109 Jam, Only When Duplexingwhen 0109 jam occurs only when making duplex prints, check the spring for the Second Delivery Flapper.
The spring may be out of place; preventing the flapper from returning back properly.

See the image below for the correct positioning of the spring.
[/QUOT

Welcome. 🍺🍻

[Ashlen21]

Thank you to all ,i changed the duplex clutch and my problem is solved .

Hi I'm having the same problem. Please assist me on whwre the duplex clutch is .

[mga]

Hi I'm having the same problem. Please assist me on whwre the duplex clutch is .

This is a old thread best to start a fresh one for yourself but problem will probably be sensor actuator has come out of place common fault

[rmmoagi]

Hi
You mind showing me with a picture,a duplex clutch that need to be cleaned or replaced.I have the same paper jam

Please arrange to clean/ replace the duplex clutch.