Thanks: 
Likes: 
Dislikes: Anyone can help me?
ir6570 ; error e014
after i check it
the problem was
Cleaning web roller get into the lower pressure roll
picture
DSC_0761.JPG
how to fix it?
Anyone can help me?
ir6570 ; error e014
after i check it
the problem was
Cleaning web roller get into the lower pressure roll
picture
DSC_0761.JPG
how to fix it?
Originally Posted by 813200217
Make sure the web take up is installed properly.
Check your manual
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
thanks
already fix it
not me but by my technician
teckat
in service menu, it said that
"cleaning blade is low"
what is that?
Cleaning blade is the drum blade, replace it or reverse it every 500k
The web can be pulled into the fuser unit if the upper fuser roller is excessively worn also the one way clutches in the web drive can fail causing the same issue.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Oneway clutch,gear,fake web,improperly installed web....
There is an option to adjust web speed in service mode.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
can you tell?
When copies/prints are made after the message has been issued, the machine starts to monitor the count (COPIER>COUNTER>MISC>FIX-WEB;
fixing web counter). When the count reaches '2000' (in terms of A4, 3000 copies/prints), the machine issues error code 'E005'.
SERVICE MODE:
COPIER>OPTION>USER>WEB-DISP
Use it to enable/disable the web length warning message:
0: off (however, the message will be indicated on the service mode screen)
1: on (default)
If you have replaced the fixing web, be sure to reset the following counter readings to '0':
- COPIER>COUNTER>MISC>FIX-WEB
fixing web counter
COPIER>COUNTER>DRBL-1>FX-WEB
COPIER>OPTION>BODY>CBLTINVL
Use it to set the number of times the fixing web solenoid goes on.
Use it if an image fault occurs as a result of soiling on the pressure roller.
0: normal (default)
1: twice as often as normal
Call your technician! mechanic-smiley-emoticon.gif
Don't mess with service mode!
Last edited by zoraldinho; 11-11-2015 at 01:05 PM.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Posting Permissions
Reply With Quote
Bookmarks