Reboots every 3 minutes. Power light stays on. Replaced ddr, flash drive, network board, and board that network board plugs in to. Assuming that is main controller. Any help would be appreciated
Thanks: 0
Likes: 0
Dislikes: 0
Reboots every 3 minutes. Power light stays on. Replaced ddr, flash drive, network board, and board that network board plugs in to. Assuming that is main controller. Any help would be appreciated
This is what I found on your issue. Have you tried reseating the DDR Memory?Originally Posted by Brian8506
Yes. And switched from another machine
Sent from my iPhone using Tapatalk
Suggestion !
Pull out the Optional PCL Printer Kit-AB1 if installed, then restart.
Image Processor PCB May be last resort.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Not sure where that kit is but it doesn't show up on options on user data report. Already changed ip board. It reboots exactly 3 min 10 sec after display comes on
Sent from my iPhone using Tapatalk
Power supply or DC controller PCB?
Also Fax NCU or fax modem can be bad.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Replaced nuclear and fax modem this morning. Haven't tried power supply because it only reboots. Green power light stays on. Isn't the ip board the school controller? No other boards back there
Sent from my iPhone using Tapatalk
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
That was ncu. Damn spell check
Sent from my iPhone using Tapatalk
NCU
index.jpg
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Posting Permissions
Reply With Quote
Bookmarks