Message : Prepaire to replace fixing roller ira c7065

[browny]

Hello All.
I have 2 machines Canon IRC ADVANCE C7065 : have messages : PREPAIRE TO REPLACE FIXING ROLLER ( on the screen ) : Do we need to replace upper fixing unit & Base fuser OR reset it ( how ) ... Please help. THANK YOU.

[teckat]

Hello All.
I have 2 machines Canon IRC ADVANCE C7065 : have messages : PREPAIRE TO REPLACE FIXING ROLLER ( on the screen ) : Do we need to replace upper fixing unit & Base fuser OR reset it ( how ) ... Please help. THANK YOU.

Estimate / U need to inspect
●: Replacement (Consumable parts)----COUNTER reset after replacement
Fixing Belt Unit---400k--------------DRBL-1 FX-BLT-U
Pressure Belt Unit---500k-----------DRBL-1 FX-BLT-L



FXMSG-SW ON/OFF of Fixing Ass’y rplce warning dis
Level.2 Details To set whether to display the warning prompting to replace the Fixing
Assembly on the Control Panel when the Fixing Assembly reaches its life.
Criteria for judging the life differ, depending on the setting value of
FXMSGSW2.

FXMSGSW2 = 0: Fixing Assembly Motor current value + Fixing Belt
Unit rotation time
FXMSGSW2 = 1: Items above + Total number of sheets fed on
Fixing Belt Unit
Factor at warning occurrence is identified in accordance with CODE
column of log displayed in COPIER> DISPLAY> ALARM-2.
• 06-0004: Current value of the Fixing Assembly Motor (FXMTR2
to 8)
• No log: Rotation time of the Fixing Belt Unit (FX-U-TM1)
• 06-0002: Total number of sheets fed on Fixing Belt Unit (FXBLT-
U)
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related service mode COPIER> OPTION> DSPLY-SW> FXMSGSW2
COPIER> DISPLAY> ALARM-2
COPIER> DISPLAY> FIXING>FX-MTR2 to 8, FX-U-TM1
COPIER> COUNTER> DRBL-1> FX-BLT-U

[browny]

THANK YOU VERY MUCH TECKAT. VERY HELPFUL INFORMATION. YOU ARE THE MOUNTAIN OF TECNOLOGY ... Best wished to your coming NEW YEAR , heathy , happy & success .

[teckat]

THANK YOU VERY MUCH TECKAT. VERY HELPFUL INFORMATION. YOU ARE THE MOUNTAIN OF TECNOLOGY ... Best wished to your coming NEW YEAR , heathy , happy & success .

Welcome !! / Have a Healthy n' Safe New Year

[MrB]

One thing you can do (Ive seen done by other engineers) is turn the option to stop that message being displayed
Personally, I would leave it switched, otherwise, you could end up with error messages pointing towards the fixing belts when there past life
fixing msg.jpg