IR-2530I

[gksapple]

How to calibrate touch panel in ir-2530i?
if have any settings pls update

[skynet]

Enter service mode (Press the Additional Functions key, then 2, then 8,

then the Additional Functions key again to enter service mode). #SSSW will

appear on the LCD Display.

Press the left arrow key once and #Test Mode will appear. Press the OK key.

Test Mode (1)*(9) will appear.

Press the 6 key on the key pad and Faculty Test (1)*(9) will appear. Press

the 7 key on the key pad.

Factory 01 02 03 will appear on the LCD Display. Select 01. Touch Panel XY

Adjust will appear on the screen.

Select (highlight) Touch Panel XY Adjust then press the OK key. A plus ( + )

sign will appear in the upper left hand corner of the LCD Display.

Press the plus ( + ) sign. The plus sign will move to the center of the LCD

Display. Press the plus sign again * the plus sign will move.

Each time you press the plus sign, the plus sign will move to a different spot

on the LCD Display until the plus sign reaches the lower right hand corner of

the LCD Display. When the plus sign reaches the lower right hand corner of

the LCD, press the plus sign one final time and the Touch Panel XY Adjust

screen will re*appear.

At this time, the calibration of the LCD Touch Display is finished. Keep

pressing the Stop key on the Control Panel until Test Mode appears then

press the Additional Functions key once to return to the normal Ready

screen on the LCD Display

[gksapple]

Enter service mode (Press the Additional Functions key, then 2, then 8,

then the Additional Functions key again to enter service mode). #SSSW will

appear on the LCD Display.

Press the left arrow key once and #Test Mode will appear. Press the OK key.

Test Mode (1)*(9) will appear.

Press the 6 key on the key pad and Faculty Test (1)*(9) will appear. Press

the 7 key on the key pad.

Factory 01 02 03 will appear on the LCD Display. Select 01. Touch Panel XY

Adjust will appear on the screen.

Select (highlight) Touch Panel XY Adjust then press the OK key. A plus ( + )

sign will appear in the upper left hand corner of the LCD Display.

Press the plus ( + ) sign. The plus sign will move to the center of the LCD

Display. Press the plus sign again * the plus sign will move.

Each time you press the plus sign, the plus sign will move to a different spot

on the LCD Display until the plus sign reaches the lower right hand corner of

the LCD Display. When the plus sign reaches the lower right hand corner of

the LCD, press the plus sign one final time and the Touch Panel XY Adjust

screen will re*appear.

At this time, the calibration of the LCD Touch Display is finished. Keep

pressing the Stop key on the Control Panel until Test Mode appears then

press the Additional Functions key once to return to the normal Ready

screen on the LCD Display

hi
Thanks for ur info.when i am trying to calibrate the first plus (+)sign appears on the display but when i am touching ,its not responding so cant able to do the calibration

[skynet]

You probably need a new one, FH6-0772-000 PANEL, ANALOG TOUCH

[MunsterTech]

interesting post....just wondering if there is a way of calibrating Iradv model screens too??? tks

[gksapple]

interesting post....just wondering if there is a way of calibrating Iradv model screens too??? tks

For ir-adv series machine
service mode copier-function-panel-touchchk

[copier tech]

This is not actually a "calibration" you are simply testing the touch panel, hence the name "touch check"

If the panel is not responding the only option is to replace it.