Hi
Found the old post, hope this helps.......CANON IRC2380i (E-067-001) NO BLACK
Hi
Found the old post, hope this helps.......CANON IRC2380i (E-067-001) NO BLACK
SAZ911..........
Good day guys,
1st of all thank you guys for giving the advice on this machine problem.
I would like to update you guys that yesterday I try again to trouble shoot these 2 machine where I have change i) drum drive unit whole assembly (which taken from a good running condition machine including the
motor drive unit)
ii) developer drive unit whole assembly (which taken from a good running condition machine including
all 4 clutches and gear mechanism)
The result is still the same problem..........
Have you checked sub-pcb boards....?
I have change the whole main controller P.C.B together with the sub p.c.b. Other than that laser unit assembly and unit 1 assembly which comes together with drum unit and developer. All parts swap from a working condition machine.
I think the only way this is going to be repaired is a big study of the manual and procedure. Sounds like we have helped here all we can.
Bookmarks