HI TEC, i having a problem with my canon ir 2200 it is showing err code 0000 51 0000 i have tried to clear it but to no avail.but after a coupples days it will become normal. i don't know what to do any help will be appreciated thanks
HI TEC, i having a problem with my canon ir 2200 it is showing err code 0000 51 0000 i have tried to clear it but to no avail.but after a coupples days it will become normal. i don't know what to do any help will be appreciated thanks
E051-0000
At start-up, home position is not detected when the horizontal registrationassembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is faulty. The horizontal registration
motor is faulty. The DC controller PCB is faulty.
Action
1. Connector
Are the connectors of the horizontal registration home position sensor and
the horizontal registration motor connected?
a. DC controller PCB (J304) <-> relay connector <-> horizontal registration
home position sensor
b. DC controller PCB (J304) <-> relay connector <-> horizontal registration
motor
NO: Connect the connectors.
2. Sensor lever (damage and interference)
Sensor Is abnormal noise heard from the horizontal registration assembly in keeping
with the motor rotation?
YES: a. The horizontal registration assembly is out of place because of
damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the
presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the
sensor.
3. Horizontal registration motor, DC controller PCB
Is the horizontal registration motor control signal generated by the DC controller
PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty. Replace the motor.
NO: Replace the DC controller PCB.
Bookmarks