Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Sep 2015
    Posts
    44
    Rep Power
    18

    canon ir6800 e079-0001/2

    Hi, all. I am having problem with my canon ir6800. the machine got stucked during the power on, and the code e079-0001, e079-0002 appeared. I checked all the connector, nothing gone wrong. I tried to clearing the error, but no luck.
    Anyone experienced this before? What should I do to correct the error?
    Tq,

  2. #2
    Senior Tech 100+ Posts aco.bk's Avatar
    Join Date
    Sep 2012
    Location
    BL
    Posts
    130
    Rep Power
    25

    Re: canon ir6800 e079-0001/2

    E079 (0002) Machine will not recognise the home position of the external heater roller on the fixing ass'y.There is an open circuit, no Ground to the home position sensor, caused by damage to the drawer connector on the rear of the fixing/Feeder Frame ass'y.Repair / Replace Drawer Connector ( fig 320 item 53 FM2-0984-000



    E079 (0001) Front bronze bush worn on shaft stopping flag cutting sensor.Change bush (FS1-1213-000)

  3. #3
    Technician
    Join Date
    Sep 2015
    Posts
    44
    Rep Power
    18

    Re: canon ir6800 e079-0001/2

    after I opened the fixing unit, I found out the cleaning roller retaining pad worn out. Did this situation affect the error e079-0001?pad.jpg

  4. #4
    Service Manager 2,500+ Posts
    canon ir6800 e079-0001/2

    skynet's Avatar
    Join Date
    Apr 2009
    Location
    You know by now
    Posts
    2,575
    Rep Power
    167

    Re: canon ir6800 e079-0001/2

    Product : imageRUNNER C5800 / C6800 / C5870U / C6870U

    Title : E079 with detail code of 0001 after a complete fixing assembly is replaced. Problem :
    The machine's display panel will have a constant E079 with a detail code of 0001
    right after the fixing assembly is replaced. The error code will still be displayed even
    after turning the machine off and on again.
    Solution :
    The E079 error code indicates the home position of the outside heating roller
    (engagement) home position sensor does not get detected. The outside heating roller
    (engagement) home position sensor does not go off.
    The detail code 0001 indicates the home position sensor does not go on within 5
    seconds after the start of the home position search.
    The error code does not reset after the machine's power is turned off and on again.
    Check the position of the outside heating roller home position sensor's (PS22) flag.
    The flag can easily be moved out of position or broken during transport.
    Note: the parts manual refers to the outside heating roller home position sensor as
    PS66 rather than PS22. (See figure 810 page 2-156)

    also see the pdf

    6800.pdf

    When you think you have made a procedure idiot proof your company employs a better idiot.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here