Results 1 to 8 of 8
  1. #1
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    2,518
    Rep Power
    65

    CANON MX926 Error B200

    I have an MX926 land on w/s bench with a B200 code on the display.
    "Turn off machine and call the service repair agent etc etc"...

    I don't have an e-manual for this machine.

    I believe it might be the print head jambing... A quick play around confirmed that I can't get full travel out of the print head.
    I'm not sure the machine is even worth fixing. I'm inclined to write it off for used parts.

    Anyone want any used parts from the above machine? Send me a PM.


    tnx

    What if we could count the stars... , what number would you stop at...?"
    [Exchange manual acquisitions, PM's CTN members only. ]
    [] |N | | o | M | Δ | t | π | | x | []

  2. #2
    Service Manager 10,000+ Posts
    CANON MX926 Error B200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: CANON MX926 Error B200

    1. Open the cover of the printer.
    2. Remove all ink tanks from the printer.
    3. Lift up the gray locking lever on the side of the ink tank holder.
    4. Gently remove the print head from the carriage unit.
    5. Place the print head back in and lock the lever down.
    6. Place all of the ink tanks back in the printer.
    7. Close the cover and turn the printer off.
    8. Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes.
    9. Plug the power back in and turn the printer on.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    2,518
    Rep Power
    65

    Re: CANON MX926 Error B200

    Update...
    Could not resolve the issue. The scan motor metal casing gives off electrical current when touched.
    I've since placed the machine in the care of the surplus-to-requirements containment department, awaiting executive decision to close the case (AKA the lid of the rubbish bin) .

    What if we could count the stars... , what number would you stop at...?"
    [Exchange manual acquisitions, PM's CTN members only. ]
    [] |N | | o | M | Δ | t | π | | x | []

  4. #4
    Service Manager 10,000+ Posts
    CANON MX926 Error B200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: CANON MX926 Error B200

    Your posting of personal advertising as an active link is not allowed , unless you pay for this service .

    seems u have not learned ---------------- and anyone who pays for that service on that site is a JERK -



    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Technician Technotronic's Avatar
    Join Date
    Feb 2006
    Posts
    13
    Rep Power
    24

    Question Re: CANON MX926 Error B200

    Saw a video that says to clean the printer head in water. Has anyone here done this w success?


  6. #6
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Posts
    124
    Rep Power
    0

    Re: CANON MX926 Error B200

    It's not worth fixing, unless your labor rate is $25 per hour. Googled it and they sell for $159.


  7. #7
    Technician Technotronic's Avatar
    Join Date
    Feb 2006
    Posts
    13
    Rep Power
    24

    Re: CANON MX926 Error B200

    In this case its a MG8120, I'm seeing them for $180 - $200 or so. Not sure if the error code is the same as the model in this
    discussion, I am guessing its the same. Client says its about 7 yrs old, looks like its been kept in really decent shape, hate to think
    its beyond repair, but I guess if its the print head, I have seen that part go for some outrageous costs when I use to service Brother stuff.


    Quote Originally Posted by campy View Post
    It's not worth fixing, unless your labor rate is $25 per hour. Googled it and they sell for $159.



  8. #8
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Posts
    124
    Rep Power
    0

    Re: CANON MX926 Error B200

    If you could talk to Canon tech support, they would tell you it's either the print head or the board. That's what they always told us. We stopped servicing the ink jet printers, there's no money in it. Between Canon and Brother I get at least one call a day for ink jet and I tell them get a new one. Some Brother printers cost $59 and I tell them it cost you $59 just to talk to me.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here