Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Sep 2012
    Location
    Chennai,Tamil Nadu
    Posts
    9
    Rep Power
    0

    iRA9070 - Multiple Error E007/E074/E013

    Hi

    we are getting multiple errors in iRA9070 printer. The First one is E007-0101 Replaced new Fixing Belt assy and Shift control assy still the problem is same.

    when we powered the machine on with front door open Error : E074-001 and E013-003 errors occuring.

    Replace new Fixing upper belt assy/fixing feed driver pcb and shift control motor assy for upper fixing belt.

    Kindly share if any one faced the problem.

    Regards,
    Ramanan.

  2. #2
    Service Manager 10,000+ Posts
    iRA9070 - Multiple Error E007/E074/E013

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iRA9070 - Multiple Error E007/E074/E013

    E013
    To enable the "Waste Toner Message", set Service mode COPIER > OPTION > DSPLY-SW > WT-WARN from the default value "0" (which will disable the message) to "1" (which will enable the message).
    ;-)
    NOTE: The waste toner should be emptied on every service call.

    E007
    Check for scraps of paper in the fuser connector.

    1.COPIER > FUNCTION > CLEAR > FX-L-CLR

    2. COPIER > COUNTER > DRBL-1 > FX-BLT-U

    3. COPIER > COUNTER > FIXING > FX-BLT-U

    After clearing the counters please excecute the belt displacement control in service mode Level 1 again under COPIER > FUNCTION > FIXING > FX-UHP.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 1,000+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    1,034
    Rep Power
    42

    Re: iRA9070 - Multiple Error E007/E074/E013

    What voltage are you running that machine on. It should be 208volts
    The specs are written on the plug
    The C9065 and C9075 require 208VAC from a NEMA 6-15P outlet.

    Also check your lower fixing lamp. It should be 208v also
    Some one might have put a 7055 lamp or fixing assemply in your 9070

    These will cause multiple Ecodes

  4. #4
    Junior Member
    Join Date
    Sep 2012
    Location
    Chennai,Tamil Nadu
    Posts
    9
    Rep Power
    0

    Re: iRA9070 - Multiple Error E007/E074/E013

    Quote Originally Posted by vigour View Post
    What voltage are you running that machine on. It should be 208volts
    The specs are written on the plug
    The C9065 and C9075 require 208VAC from a NEMA 6-15P outlet.

    Also check your lower fixing lamp. It should be 208v also
    Some one might have put a 7055 lamp or fixing assemply in your 9070

    These will cause multiple Ecodes

    Hi All,
    Problem resolved after Power supply repaired and fixed.

    Thank You.
    Ramanan

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here