IR-2530i

[gksapple]

while taking A4 duplex jobs paper is jamming (new machine , total counter 2000)

jam code :010D (duplex feeding sensor)

*A4R and A3 duplex is working fine

Action taken
*checked the S7 duplex feed sensor seems ok (connectors & flag springs)
*swapped the duplex clutch cl4 to cl3 but still jamming is happening with A4

[ernesto]

What about solenoids...?

[apoxi]

while taking A4 duplex jobs paper is jamming (new machine , total counter 2000)

jam code :010D (duplex feeding sensor)

*A4R and A3 duplex is working fine

Action taken
*checked the S7 duplex feed sensor seems ok (connectors & flag springs)
*swapped the duplex clutch cl4 to cl3 but still jamming is happening with A4

Look for duplex clutch

[gksapple]

Look for duplex clutch

duplex clutch and reversing unit solenoid has no issue

*clutch has been swapped
*full reversing unit with solenoid has been replaced
*still paper jam (010d)

[ernesto]

duplex clutch and reversing unit solenoid has no issue

*clutch has been swapped
*full reversing unit with solenoid has been replaced
*still paper jam (010d)

Is it an intermitent jam? In the irc adv 2225.... 010d jam code is caused by solenoid....

[Blizzoo]

Check the pressure between black plastic rollers (located on fuser) and the duplex feed roller on the RH door.

[gksapple]

[QUOTE=Blizzoo;509261]Check the pressure between black plastic rollers (located on fuser) and the duplex feed roller on the RH door.[/QUOT

ISSUE RESOLVED BY CLEANING THE ROLLERS (FC5-1358-000) IN TH FIXING UNIT ASSEMBLY( TONER ACCUMULATED ON IT ) ,