Thanks: 0
Likes: 0
Dislikes: 0
IRA6055 Lead edge dusting- Back ground
Will dust/ back ground for the first 5 or 6 pages.
Darkest on the lead edge and is lighter to the trailing edge.
Changed the transfer belt, cleaning blade.
Im thinking it might be the Transfer belt..?? Belt Bias..??
Any suggestions.
Thanx IW
Transfer belt..?? IRA6055..??
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Originally Posted by zoraldinho
This is the name and part number
Iv'e seen these on Ricoh before and they would leave a back ground as well
I just changed the ETB cleaning blade and would solve the problem. Any suggestions.
Canon imageRUNNER ADVANCE 6055 Electrostatic Transfer Belt (ETB) FM4-0916-010
You are right! Sorry. I call this transport. Old scool.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Any one out there had this problem...Thinking im going to change the transfer belt next.
Could it be a Bias problem, seen that on the old Ricoh Box's...... any suggestions ??
I like the transfer belt on higher speeds over Corona Wires ...way more reliable..
Thanx again IW
Bias issue.Good point.
From service bulletins Also can be:
-Defective Developing High Voltage Contact
-New Style Cleaning Blade?
-Drum Cleaning Assembly
Please post a sample.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
There is a transfer roller in the ETB assembly, it goes bad sometimes
The bearings seize up too.
Sometimes you need to replace the whole assembly, modified ones have no springs to pinch when installing or removing
Thanks guys...This ones kinda got me baffled..(love this system thou, works way better than corona wires)
The old Ricohs were exactly the same, just replace the cleaning blade and you were good to go.
I think transfer roller controls the Bias ( could be wrong don't have a manual yet)
but will check the bearings and condition of the roller, cleaning unit and the Dev again.
Thanks
will post sample
IW
Post a sample. Primary and pre-transfer corona wires been replaced? This is of course step 1...
Still having this problem with dusting....Here some pictures this time
1 002 copy.jpg1 003 copy.jpg
Posting Permissions
Reply With Quote
Bookmarks