Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    IR-A-C5035 e00020-0011 and the -0014

    Hello , im facing a werid problem in ir advc5030i ,it working perfectly when i just want to make init-4 on service mode , the machine gave me error code e00020-0011 ,then i tried init-y it gave the error also i tried init-k it gave me also error but another ext-0014 i changed the yellow drum , still y error code occuar ,i changed the itb belt and same problem checked the patch sensor guide its not broken and i also cleaned it same error 0014 i made clear dc and same error occuar when i make init ,werid honestly first time i face this any one can help me thanks.
    Distinguished road makes you jewel in rough

  2. #2
    Field Supervisor 500+ Posts roho's Avatar
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    844
    Rep Power
    43

    Re: IR-A-C5035 e00020-0011 and the -0014

    Did you install new devs? Initialization is for replacement only, not for maintenance. If you haven't replaced them and try to init them, you may well be replacing them soon.

  3. #3
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: IR-A-C5035 e00020-0011 and the -0014

    Quote Originally Posted by roho View Post
    Did you install new devs? Initialization is for replacement only, not for maintenance. If you haven't replaced them and try to init them, you may well be replacing them soon.
    No i didnt replaced them its counter 13% looks new but cos the machine came from abroad and i want to make a full repair before i sold it cos of that i said to make init-4 but even so must adjut and shouldng give me a code.
    Distinguished road makes you jewel in rough

  4. #4
    Service Manager 2,500+ Posts
    IR-A-C5035  e00020-0011 and the -0014

    skynet's Avatar
    Join Date
    Apr 2009
    Location
    You know by now
    Posts
    2,575
    Rep Power
    167

    Re: IR-A-C5035 e00020-0011 and the -0014

    From 5000 series service manual revision 12

    INIT-C C toner dens signal initial VL reading
    Lv.2 Details [Not used] To read the initial value of C toner density value (SGNL-C,
    REF-C).
    After feeding over 100 sheets using a new Toner Container, this
    mode can reset this Toner Container as a new one.
    Use case When a new Toner Container which 100 or more sheets are fed for
    image failure test, etc. is used as a new one again
    Adj/set/operate method Select the item, and then press OK key.
    Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
    Related service mode COPIER> ADJUST> DENS> SGNL-C, REF-C

    From 5200 series service manual

    INIT-Y [Not used]
    INIT-M [Not used]
    INIT-C [Not used]
    INIT-K [Not used]


    When you think you have made a procedure idiot proof your company employs a better idiot.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here