Problem with Canon IR 2525 i print without error and no printing shows up

[Simba]

Hello ,,

i have a problem with Canon Ir 2525 printer
1 user printing fine but the others not printing
the print job sent to the printer and i can see it in the logs but nothing happend and the printer bibs but the print didn't exit from the printer



i installed the drivers right from canon
windows firewall is off
print spooler is running
there is no problem when i troubleshoot the printer found
the printer is active and one user printing correctly

[Canuck]

UFRII driver? Sounds like wrong driver. If it prints from one workstation obviously there is nothing wrong with the printer. IDs,limits,or something. I would make sure its the correct updated driver then create a new port and re-map the port at each workstation. Not a copier issue.

[SAZ911]

UFRII driver? Sounds like wrong driver. If it prints from one workstation obviously there is nothing wrong with the printer. IDs,limits,or something. I would make sure its the correct updated driver then create a new port and re-map the port at each workstation. Not a copier issue.

Hi,

I agree with Canuck, it sound like a driver issue in that is picks up the print job but cant process it, then dumps the job and sounds the beep as if it has printed but nothing prints, I had the same issue last Friday where the client was trying to print to a Canon IR 2525i using Canon IR 2020 drivers and did exactly what you described.

I installed the latest UFRII driver and all was well.....

Good luck....