Originally Posted by
teckat
=========================
My tech pal said-----------------
An L9 error code could be cause by the printer not being set correctly in service mode.
If the wrong printer is set in service mode you will have to connect the MS350II to a PC to change the printer. ?? !!
And try re_seating the Printer Cable to the DC Controller.
================================================== ==============================
aware of it / never used
Original Service Tool I believe was included on your Products Set UP CD -ROM, some original shipments had Service Tool Ver 1.2 which was not compatible for MS-300II/350II.
Your product probably has Original v1.4 / v1.5 issue supported USB/ and v1.7 has 64bit OS Support.
Bookmarks