Hi, how do i set Limit colour setting for iR ADV C5051 ?
means the step by step for Colour only & for both (B&W and Colour)
Thank You
Hi, how do i set Limit colour setting for iR ADV C5051 ?
means the step by step for Colour only & for both (B&W and Colour)
Thank You
isnt that thru the smart head and then pin codes where you can set limits? is that what you mean?
Question :
How do you Prevent Color Copies using Department ID?
Answer :
To prevent Color copies from being made using Department id, follow these instructions.
1) Select [Additional Function].
2) Select [System Settings].
3) Select [Department ID Management].
4) Select [ON].
5) Select [Register Dept.ID/Password].
6) Select [register].
7) Enter a Department ID number with a password.
8) Select [Turn Limits ON/OFF and Set Page Limit].
9) Select [Color Copy Limit] and turn [ON] and leave counter to 00000.
10) Press [OK]
If you try to make a copy the copier will not permit you. You will get an error message: [Reached counter Limit. The printing/reserved jobs may be stopped. Check the print logs].
For imageRUNNER ADVANCE Models
1) Select [Settings/Registration].
2) Select Login
3) Enter The System Mgr and System Pin and press [Login].
4) Select [Management Settings]
5) Select [User Management].
6) Select [Department ID Management].
7) Follow directions from step 4 above
Accidents don't just happen. They must be carelessly planned.
& what about restricting print too, is there a colour PDF available for this?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
you can change those settings under settings/registration.
allow B/W copies and prints or leave everything locked down. However you choose to set it up.
Accidents don't just happen. They must be carelessly planned.
Bookmarks